一、產品描述
二、工作原理
該TK、TD型壓力控制器的主要用途是控制壓力范圍的裝置。 在高壓端壓力超過調定值或低壓力低于調定值時（帶S型按下復位鈕）控制器就能切斷電路。使被控制系統停止工作以起保護和自動控制作用。
三、技術參數
型號Model
壓力調節范圍Mpa pressure adjusting range
壓力差Mpa pressure difference
開關觸頭容量Suitcher rate
適用介質acceptable media
TK15
0.4～1.5
0.2～0.4
AC:220/380V 0.3ADC:115/230V 50W
被控介質應對黃銅、鉛錫焊料無腐蝕作用The media controlled should have no corrosive action to stainless stell,iron solder
TK20
0.7～2.0
被控介質應對不銹鋼、鐵、鉛錫焊料無腐蝕作用The media controlled should have no corrosive action to staqinless stell,iron and lead-tin solder
TD550
-0.073～0.35
0.05～0.15
被控介質應對黃銅、錫青銅、鐵、不銹鋼、鉛錫焊料無腐蝕作用The media controlled should have no corrosive action to bronze、bass,stainless steel,iron and lead-tin solder